Update Object Encryption

s3_update_object_encryption

R Documentation

This operation is not supported for directory buckets or Amazon S3 on Outposts buckets¶

Description¶

This operation is not supported for directory buckets or Amazon S3 on Outposts buckets.

Updates the server-side encryption type of an existing encrypted object in a general purpose bucket. You can use the update_object_encryption operation to change encrypted objects from server-side encryption with Amazon S3 managed keys (SSE-S3) to server-side encryption with Key Management Service (KMS) keys (SSE-KMS), or to apply S3 Bucket Keys. You can also use the update_object_encryption operation to change the customer-managed KMS key used to encrypt your data so that you can comply with custom key-rotation standards.

Using the update_object_encryption operation, you can atomically update the server-side encryption type of an existing object in a general purpose bucket without any data movement. The update_object_encryption operation uses envelope encryption to re-encrypt the data key used to encrypt and decrypt your object with your newly specified server-side encryption type. In other words, when you use the update_object_encryption operation, your data isn't copied, archived objects in the S3 Glacier Flexible Retrieval and S3 Glacier Deep Archive storage classes aren't restored, and objects in the S3 Intelligent-Tiering storage class aren't moved between tiers. Additionally, the update_object_encryption operation preserves all object metadata properties, including the storage class, creation date, last modified date, ETag, and checksum properties. For more information, see Updating server-side encryption for existing objects in the Amazon S3 User Guide.

By default, all update_object_encryption requests that specify a customer-managed KMS key are restricted to KMS keys that are owned by the bucket owner's Amazon Web Services account. If you're using Organizations, you can request the ability to use KMS keys owned by other member accounts within your organization by contacting Amazon Web Services Support.

Source objects that are unencrypted, or encrypted with either dual-layer server-side encryption with KMS keys (DSSE-KMS) or server-side encryption with customer-provided keys (SSE-C) aren't supported by this operation. Additionally, you cannot specify SSE-S3 encryption as the requested new encryption type update_object_encryption request.

Permissions¶

To use the update_object_encryption operation, you must have the following permissions:
s3:PutObject
s3:UpdateObjectEncryption
kms:Encrypt
kms:Decrypt
kms:GenerateDataKey
⁠kms:ReEncrypt*⁠
If you're using Organizations, to use this operation with customer-managed KMS keys from other Amazon Web Services accounts within your organization, you must have the organizations:DescribeAccount permission.

Errors¶

You might receive an InvalidRequest error for several reasons. Depending on the reason for the error, you might receive one of the following messages:
The update_object_encryption operation doesn't supported unencrypted source objects. Only source objects encrypted with SSE-S3 or SSE-KMS are supported.
The update_object_encryption operation doesn't support source objects with the encryption type DSSE-KMS or SSE-C. Only source objects encrypted with SSE-S3 or SSE-KMS are supported.
The update_object_encryption operation doesn't support updating the encryption type to DSSE-KMS or SSE-C. Modify the request to specify SSE-KMS for the updated encryption type, and then try again.
Requests that modify an object encryption configuration require Amazon Web Services Signature Version 4. Modify the request to use Amazon Web Services Signature Version 4, and then try again.
Requests that modify an object encryption configuration require a valid new encryption type. Valid values are SSEKMS. Modify the request to specify SSE-KMS for the updated encryption type, and then try again.
Requests that modify an object's encryption type to SSE-KMS require an Amazon Web Services KMS key Amazon Resource Name (ARN). Modify the request to specify a KMS key ARN, and then try again.
Requests that modify an object's encryption type to SSE-KMS require a valid Amazon Web Services KMS key Amazon Resource Name (ARN). Confirm that you have a correctly formatted KMS key ARN in your request, and then try again.
The BucketKeyEnabled value isn't valid. Valid values are true or false. Modify the request to specify a valid value, and then try again.
You might receive an AccessDenied error for several reasons. Depending on the reason for the error, you might receive one of the following messages:
The Amazon Web Services KMS key in the request must be owned by the same account as the bucket. Modify the request to specify a KMS key from the same account, and then try again.
The bucket owner's account was approved to make update_object_encryption requests that use any Amazon Web Services KMS key in their organization, but the bucket owner's account isn't part of an organization in Organizations. Make sure that the bucket owner's account and the specified KMS key belong to the same organization, and then try again.
The specified Amazon Web Services KMS key must be from the same organization in Organizations as the bucket. Specify a KMS key that belongs to the same organization as the bucket, and then try again.
The encryption type for the specified object can’t be updated because that object is protected by S3 Object Lock. If the object has a governance-mode retention period or a legal hold, you must first remove the Object Lock status on the object before you issue your update_object_encryption request. You can't use the update_object_encryption operation with objects that have an Object Lock compliance mode retention period applied to them.

Usage¶

s3_update_object_encryption(Bucket, Key, VersionId, ObjectEncryption,
  RequestPayer, ExpectedBucketOwner, ContentMD5, ChecksumAlgorithm)

Arguments¶

Bucket

[required] The name of the general purpose bucket that contains the specified object key name.

When you use this operation with an access point attached to a general purpose bucket, you must either provide the alias of the access point in place of the bucket name or you must specify the access point Amazon Resource Name (ARN). When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Referencing access points in the Amazon S3 User Guide.

Key

[required] The key name of the object that you want to update the server-side encryption type for.

VersionId

The version ID of the object that you want to update the server-side encryption type for.

ObjectEncryption

[required] The updated server-side encryption type for this object. The update_object_encryption operation supports the SSE-S3 and SSE-KMS encryption types.

Valid Values: SSES3 | SSEKMS

RequestPayer

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for the corresponding charges. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

This functionality is not supported for directory buckets.

ExpectedBucketOwner

The account ID of the expected bucket owner. If the account ID that you provide doesn't match the actual owner of the bucket, the request fails with the HTTP status code ⁠403 Forbidden⁠ (access denied).

ContentMD5

The MD5 hash for the request body. For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.

ChecksumAlgorithm

Indicates the algorithm used to create the checksum for the object when you use an Amazon Web Services SDK. This header doesn't provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code ⁠400 Bad Request⁠. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

Value¶

A list with the following syntax:

list(
  RequestCharged = "requester"
)

Request syntax¶

svc$update_object_encryption(
  Bucket = "string",
  Key = "string",
  VersionId = "string",
  ObjectEncryption = list(
    SSEKMS = list(
      KMSKeyArn = "string",
      BucketKeyEnabled = TRUE|FALSE
    )
  ),
  RequestPayer = "requester",
  ExpectedBucketOwner = "string",
  ContentMD5 = "string",
  ChecksumAlgorithm = "CRC32"|"CRC32C"|"SHA1"|"SHA256"|"CRC64NVME"|"SHA512"|"MD5"|"XXHASH64"|"XXHASH3"|"XXHASH128"
)